too many choices
#1
Posted 2009-December-07, 09:23
partner open 1C, RHO weak 2H.
1C (2H*) ??
♥:K
♥K8XXX
♦QX
♣QJ10XX
what choice, and reason ?
thanks
#2
Posted 2009-December-07, 09:30
George Carlin
#3
Posted 2009-December-07, 09:52
wyman, on 2012-May-04, 09:48, said:
rbforster, on 2012-May-20, 21:04, said:
My YouTube Channel
#4
Posted 2009-December-07, 11:00
and will happily reopen with
Axxx -- Axxx AKxxx
Axxx x Axxx Axxx
and while you might beat 2H, you might be better off in a game/slam in clubs. So I think this hand needs to raise clubs ( no strong feelings about LR vs GF ) .
#5
Posted 2009-December-07, 14:21
wyman, on 2012-May-04, 09:48, said:
rbforster, on 2012-May-20, 21:04, said:
My YouTube Channel
#6
Posted 2009-December-07, 14:29
#8
Posted 2009-December-08, 01:21
Axxx
x
Axx
A10xxx
A 5♣ game should have some play opposite most hands, and who says 3♥ forces beyond 4♣ if pard is really wretched? Of course, 3♣ is a reasonably close second for me.
#9
Posted 2009-December-08, 02:17
#10
Posted 2009-December-08, 03:15
Roland
Sanity Check: Failure (Fluffy)
More system is not the answer...
#11
Posted 2009-December-08, 04:32
#12
Posted 2009-December-08, 05:18
hanp, on Dec 8 2009, 12:32 PM, said:
Depends on what my partner wants
#13
Posted 2009-December-08, 05:21
George Carlin
#14
Posted 2009-December-08, 10:08
i jump 4C to invite at table; the drawback is bypass 3N, however i argue that possible 5-5 club fit and both heart and spade singleton argues for suit contract.
is it valid point or the value is too soft, which is still better for NT contract ?
this is whole hand
.
♥ AQJX
♥ X
♦ AXX
♣ AKXXX
.
♥ K
♥ K8XXX
♦ QX
♣ QJ10XX
;
;
1C (2H) ??
1) 2N, then both have to try hard to find club fit.
1C (2H) 2N
3S 4C here 4C only promise 3 club as i understand.
4D 4S (don't cue H)
6C
not easy for me to reach 6C
2) 3C, as long as south cuebid S, 6C is possible
1C (2H) 3C
3D 3S
..
6C
3) PASS, it won't lead to good result when 9-10 club fit.
(unless vulerability changes)
1C (2H) P
X ?? touch choice now, pass again ?
..
only my 2 cents, feel free to comment, thanks.
shan
#15
Posted 2009-December-08, 14:06
#16
Posted 2009-December-08, 14:32

Help
